|
|
Trezzini
Solid Surface Veneer meets or exceeds the requirements of the
International Cast Polymer Association Standard ICPA-SS-1-1997:
Performance Standards for Solid Surfce Materials. There are
however, no other Australian or International Standards applicable
to solid surface materials. When tested to other relevant Australian
and International standards though, the following results were
obtained: |
| AUSTRALIAN
STANDARDS |
 |
Resistance
to Heat on the Surface of Sinks (adapted) AS3558.23
|
No
effect except slight
change in surface profile |
 |
Resistance
to Hot Liquids on the Surface of Sinks (adapted) AS3558.24
|
Whitening
and slight rippling |
 |
Degradation
by UV Light AS3558.5
|
5 |
 |
Resistance
to Cracking AS2925.8
|
0 |
 |
Resistance
to Impact AS2925.7-1987
|
>2400mm |
 |
Boiling
Water AS2925.4-198
|
7
0.5% |
 |
Dimensional
Stability AS2925.6
|
0.15%
(Across Grain)
0.15% (With Grain) |
 |
Resistance
to Cigarette Burns AS2925.11
|
No
effect except slight yellowing |
 |
Determination
of Colour Fastness AS3558.3
|
2-5 |
 |
Resistance
to Scratching AS3558.3
|
No
significant scratching until 5H lead |
 |
| |