Get The Edge Decorative edging options complete the stylish, handcrafted picture. Add stark contrasting edges, coordinated complementary colour or the timeless look of continuous colours that flow from your benchtop all the way down to your edging. Edging can be customised to suit the look and feel of your kitchen, creating any routed design; the only limitation...is your imagination. Trezzini feels and looks as flawless as ancient stone. And lasts just as long. Finish Options Trezzini Solid Surface Veneer sheets are supplied with a sanded surface. A certified Trezzini Fabricator/ Installer will supply the final finish. The finish options are: Matt A soft low sheen finish recommended for light to medium colours. It is a low maintenance finish suitable for every day worktops. Satin A slightly higher sheen than matt, recommended for darker colours. It is a medium maintenance finish. Semi-gloss A much higher gloss level than Satin. It is recommended for light purpose horizontal applications only or any vertical application. Requires a certified fabricator to finish. Not recommended for kitchen benchtop applications. High-gloss A very high gloss to mirror sheen finish requiring a very high degree of care. It will tend to highlight slight scratch marks more easily than the other 3 finishes mentioned above and hence is recommended for vertical applications only. The finish can only be renewed by a certified fabricator. High loss is not recommended for benchtop applications
Double Inlay		Horizontal Inlay
Horizontal Inlay		4mm Round Over
Vertical Inlay 12mm		Double Bevel
Vertical Inlay 3mm		Classic Ogee
Contrasting Edge		3mm Round Over
10mm Round Over		Extended Edge

Inlays may be used with any profile based on the 12mm standard profile.  Materials for these inlays are wood, laminate, decorative metals and Trezzini. All other decorative profiles can be created by your local fabricator. These illustrations represent only a few of the possibilities.

Edge Profiles (click on a profile to enlarge)

Standard Profile	Single Bevel (9.6mm)	Double Bevel (9.6mm)	Round Over (6.4mm)	Double Round Over (6.4mm)
Cove Cut (9mm)	Double Cove Cut (9mm)	Single Bevel with inlay	Single Bevel with double inlay	Non-Drip Edge
Double Round Over (12.7mm)	Classic Ogee	Double Classic Ogee	Roman Ogee	Double Roman Ogee
		Inlays may be used with any profile based on the 12mm Standard Profile. Materials for these inlays are wood, laminate, decorative metals and Trezzini. All other decorative profiles can be created by your local fabricator. These illustrations represent only a few of the possibilities.
Self-Edge	Custom Bevel Edge